Automatically Storing The Strongest Stations With Travelstore; Recalling Stored Stations; Scanning Stored Stations With Preset Scan; Scanning Stations With Radio-Scan - Blaupunkt RCM 127 Operating Instructions Manual

Notice:
Should you tune in a station which has al-
ready been stored before, then the corre-
sponding preset position and memory bank
will briefly flash in the display.
Automatically storing the
strongest stations with
Travelstore
You can automatically store the six most
powerful FM stations of your current recep-
tion area sorted according to their signal
strength. This function is particularly conven-
ient on longer trips.
• Press the FMT or BND button for
1 sec.
"T-STORE" will appear in the display.
The six strongest FM stations will be auto-
matically stored on the memory bank "T"
(Travelstore). When this process has been
completed, the radio will play the first sta-
tion stored on preset 1.
If desired, stations can also be stored man-
ually on the Travelstore bank (see "Storing
stations").
38

Recalling stored stations

You can recall any stored station at the touch
of a button.
• Select the memory bank with FMT or
BND.
• Press the corresponding preset button
briefly to recall the station.
Scanning stored stations with
Preset Scan
You can have all of the stored stations briefly
scanned on all wavebands.
To start Preset Scan:
• Press SC for approximately 1 sec.
All of the stored stations to be received will
be scanned one after the other.
To select a scanned station and switch
off Preset Scan:
• Press SC briefly.
Note:
If "TA" shows on the display panel, the sys-
tem will scan the stored traffic stations only.
Scanning stations with Radio-
Scan
You can also scan all stations which can
currently be received.
To start the Scan function:
• Press SC briefly.
The scanned frequency or the station name
will start flashing in the display. During the
actual scanning process "FM-SCAN" or
"AM-SCAN" will be displayed.
To select a scanned station and switch
off Radio-Scan:
• Press SC briefly.
If no station is selected, the scan function
will be automatically switched off after the
frequency band has been run through com-
pletely. The unit will tune in the station lis-
tened to before starting the scan.