Setting The Closed Captions; Cc Advanced; Adjusting The Picture Preference; Picture Settings - Toshiba 15LV505 Service Manual

TV operation
Setting the V-Chip (Continued)
As a supplement to the standard V-Chip rating system, your television will
be able to download an additional rating system, if such a system becomes
available in the future.
To download the additional V-Chip rating system (when available)
1
Press MENU in the TV mode. The TV menu
screen will appear. Press or to select
"Lock", then press or ENTER.
Main Menu
Picture
Audio
Channel
Lock
Setup
: Select ENTER:Set
2
Use Number buttons (0-9) to enter your pass-
word, then press ENTER. Then Lock menu will
appear.
Lock
Password
----
[0-9] : Select ENTER:Set
3
Press or to select "V-Chip Set (DTV)",
then press or ENTER.
Lock
V-Chip On
V-Chip Set >>
V-Chip Set (DTV) >>
Update >>
Change Password >>
: Select ENTER:Set
4
If the TV/DVD is not storing the additional
rating system, the TV/DVD will begin down-
loading it, which may take some time to be
completed.
5
Set your preferred content rating limits for the
additional rating system.
32
TV operation

CC advanced

When you have selected Custom as the display method, you can adjust the
various setting listed below as follows:
This feature is designed to customize Digital Captions only.
CC advanced
1
Press MENU in the TV mode. Press or to
select "Setup", then press or ENTER.
Main Menu
Picture
Audio
Channel
Lock
Setup
: Select ENTER:Set
2
Press or to select "Closed Caption",
then press or ENTER.
The Closed Caption menu will appear.
Setup
Closed Caption >>
Language English
Video Label >>
Backlight 16
Auto Shut Off Off
Aspect On
Reset >>
: Select ENTER:Set
3
Press or to select "Digital CC Preset",
then press or to select "Custom".
Closed Caption
CC Setting On
CC Priority Digital CC
Analog Caption C1
Digital Caption CS1
Digital CC Preset Custom
CC Advanced >>
: Select : Adjust
4
Press or to select "CC Advanced", then
press or ENTER.
The CC Advanced menu will appear.
Closed Caption
CC Setting On
CC Priority
Digital CC
Analog Caption C1
Digital Caption CS1
Digital CC Preset Custom
CC Advanced >>
: Select ENTER:Set
34
0–9
ENTER
/ /
MENU
6
You also need "Update" procedure to update
rating information.
Note:
• You can only download the additional V-Chip rating
system when your TV/DVD is receiving a digital signal.
• When you download the additional rating system, it
may take some time for the download to occur.
• The V-Chip rating information and system are not
determined or controlled by the TV/DVD.
• The standard V-Chip rating system is available
whether your TV/DVD is receiving a digital signal or
not, and will block both analog and digital programs.
To set the restriction level using the standard V-Chip
rating system, select "V-Chip Set" in step 3.
• The downloadable V-Chip rating system is an evolving
technology, and availability, content, and format may
vary.
• You cannot select this feature if the TV/DVD is not
receiving a digital signal for the current station.
ENTER
/ / /
EXIT/CANCEL
MENU
5
Press or to select the desired item,
then press or to change the setting.
CC Advanced
Text Size Auto
Text Type Auto
Text Edge Auto
Text Color Auto
Text Opacity Auto
Background Color Auto
Background Opacity Auto
: Select : Adjust
You can select from among the following items
and parameters.
Text Size: Auto, Small, Standard, Large
Text Type: Auto, Style1, Style2, Style3,
Style4, Style5, Style6, Style7
Text Edge: Auto, None, Raised, Depressed,
Uniform, Left Shadow, Right
Shadow
Text Color: Auto, Black, White, Red, Green,
Blue, Yellow, Magenta, Cyan
Text Opacity: Auto, Solid, Transparent,
Translucent, Flashing
Background Auto, Black, White, Red, Green,
Color: Blue, Yellow, Magenta, Cyan
Background Auto, Solid, Transparent,
Opacity: Translucent, Flashing
6
Press EXIT/CANCEL to return to the normal
screen.
Note:
• You cannnot select "CC Advanced" in the menu
before set "Digital CC preset" to "Custom".
• You cannot set the Closed Caption "Text Color" and
"Background Color" as the same color.

Setting the closed captions

WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display closed captioned
television programs. Closed captioning will display text on the screen for
hearing impaired viewers or it will translate and display text in another
language.
Setting the closed captions
1
Press MENU in the TV mode. Press or to
select "Setup", then press or ENTER.
Main Menu
Picture
Audio
Channel
Lock
Setup
: Select ENTER:Set
2
Press or to select "Closed Caption",
then press or ENTER.
The Closed Caption menu will appear.
Setup
Closed Caption >>
Language English
Video Label >>
Backlight 16
Auto Shut Off Off
Aspect On
Reset >>
: Select
ENTER:Set
3
Press or to select "CC Setting", then
press or to select "On".
On: Captions will be displayed on the screen.
Off: Captions will not be displayed on the screen.
Closed Caption
CC Setting Off
CC Priority Digital CC
Analog Caption C1
Digital Caption CS1
Digital CC Preset Default
CC Advanced >>
: Select : Adjust
Note:
• You can also display the Closed Caption menu screen by pressing CLOSED CAPTION on the remote control.
• Digital caption feature is not available for analog channel.
Important Note:
If text is not available in your viewing area, a black rectangle may appear on-screen. If this happens, set
"CC Setting" to "Off".

Adjusting the picture preference/

Picture settings

You can select four picture modes—Sports, Standard, Movie and Memory—
as described in the following table:
Picture settings are factory preset but you can adjust them individually as
follows:
Adjusting the picture preference
1
Press MENU in the TV mode. The TV menu
screen will appear. Press or to select
"Picture", then press or ENTER.
Main Menu
Picture
Audio
Channel
Lock
Setup
: Select ENTER:Set
2
Press or to select "Picture Preference".
Picture
Picture Setting >>
Picture Preference Sports
Picture Size >>
Film Mode On
DNR On
: Select : Adjust
3
Press or to select a mode you want to
adjust.
Picture
Picture Setting >>
Picture Preference Standard
Picture Size >>
Film Mode On
DNR On
: Select : Adjust
Mode Picture Quality
Sports Bright and dynamic picture (factory-set)
Standard Standard picture quality (factory-set)
Movie Movie-like picture setting (factory-set)
Memory Your personal preferences (set by
you; see "Picture settings" at right).
4
After your desired setting, press EXIT/
CANCEL to return to the normal screen.
ENTER
/ / /
EXIT/CANCEL
MENU
CLOSED CAPTION
4
Press or to select "Analog Caption" or
"Digital Caption", then press or to select
the desired Closed Caption mode.
When you select "Analog Caption", you can
choose C1, C2, C3, C4, T1, T2, T3 and T4.
When you select "Digital Caption", you can
choose from CS1, CS2, CS3, CS4, CS5 and CS6.
Closed Caption
CC Setting On
CC Priority
Digital CC
Analog Caption C1
Digital Caption CS1
Digital CC Preset Default
CC Advanced
>>
: Select : Adjust
5
Press or to select "CC Priority", then
press or to select "Digital CC" or "Analog
CC".
Note:
• Depending on the broadcast signal, some
Analog Captions will function with a Digital
broadcast signal. This step prevent that two kind
of captions are overlapping.
6
Press EXIT/CANCEL to return to the normal
screen.
33
ENTER
/ / /
EXIT/CANCEL
MENU
Picture settings
1
Press MENU in the TV mode. The TV menu
screen will appear. Press or to select
"Picture", then press or ENTER.
2
Press or to select "Picture Setting", then
press or ENTER.
The Picture Setting menu will appear.
Picture
Picture Setting >>
Picture Preference Sports
Picture Size >>
Film Mode On
DNR On
: Select ENTER:Set
3
Press or to select the item you want to
adjust. Press or to adjust the setting.
Picture Setting
Brightness 25
Contrast 50
Sharpness 25
Color 25
Tint 0
Color Temperature Cool
: Select : Adjust ENTER:Set
Brightness decrease increase
brightness brightness
Contrast decrease increase
contrast contrast
Sharpness makes picture makes picture
softer clearer
Color be pale color be brilliant color
Tint be reddish color be greenish
color
Color Temperature Picture Quality
Cool Bluish
Standard Neutral
Warm Reddish
4
After your desired setting, press EXIT/
CANCEL to return to the normal screen.
Note:
• The Contrast default setting is set to maximum at the
factory.
35