Connecting To Optional Equipment; Power Source - Toshiba 15LV505 Service Manual

Connections

Connecting to optional equipment

You can enjoy VCR, camcorder or TV game with connection to external input.
Using the audio/video inputs
Press INPUT to view a signal from another device connected to your TV/DVD, such
as a VCR player. You can select TV, Video or ColorStream HD depending on which
input jacks you used to connect your devices.
Press INPUT on the remote control to display the current signal source.
To change the input source, press INPUT again or press 0-2. (3 is for selection DVD
mode.)
Connecting to a VCR
To playback from the VCR, connect the VCR to the TV/DVD as shown.
Select the "Video" by pressing INPUT repeatedly.
VCR
: Signal fl ow
To Audio/Video OUT
Audio/Video cable (not supplied)
Connecting to a camcorder
To playback from the camcorder, connect the camcorder to the TV/DVD as shown.
Select the "Video" by pressing INPUT repeatedly.
: Signal fl ow
Camcorder
To Audio/Video OUT
Audio/Video cable (not supplied)
Connecting to a TV Game
You can enjoy playing a TV game on the screen by adjusting to the suitable brightness for your eyes.
1. Connect a TV Game to the TV/DVD.
2. Select the Game mode by pressing GAME. The Game mode screen appears.
• If GAME is pressed during standby mode, the unit turns on automatically and the Game mode screen
appears on the screen.
: Signal fl ow
To Audio/Video OUT
Audio/Video cable (not supplied)
Note:
• You can also change the TV/DVD screen to the desired mode by pressing the CH
• The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of
different types of signal generated by these devices and subsequent hook-up variations required, they have not all
been included in the suggested connection diagrams. You ll need to consult each component s Owner s Manual
for additional information.
• Interactive video games that involve shooting a "gun" type of joystick at on-screen target may not work on this
TV/DVD.
16
Connections
Connecting to optional equipment (Continued)
You can enjoy high quality dynamic sounds by connecting the
TV/DVD to optional audio equipment.
Connecting to an amplifi er equipped with a Dolby
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce
this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs encoded via the Dolby Digital
recording system with this dynamic realistic sound by connecting the TV/DVD to a 6 channel amplifi er equipped with a Dolby
Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the full benefi t of
Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the
Dolby Surround mark.
Amplifi er equipped with a
Dolby Digital decoder
To COAXIAL
type digital
audio input
75 Ω coaxial cable (not supplied)
Connecting to an amplifi er equipped with a DTS
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefi t of 5.1 channel DTS encoded sound tracks on DVD
video discs or audio CDs.
Amplifi er equipped with
a DTS decoder
To COAXIAL
type digital
audio input
Ω
75 coaxial cable (not supplied)
Connecting to an amplifi er equipped with an MPEG audio decoder
MPEG2 sound
You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic
realistic sound by connecting an amplifi er equipped with an MPEG2 audio decoder or MPEG2 audio processor.
Amplifi er equipped with an
MPEG2 audio decoder
To COAXIAL
type digital
audio input
Ω
75 coaxial cable (not supplied)
18
0-3
CH /
INPUT
GAME
Source Selection
0.TV
1.Video
2.ColorStream HD
3.DVD
[0-3]:Select
Back side
(yellow)
(white)
(red)
To VIDEO/GAME IN
Back side
(yellow)
(white)
(red)
To VIDEO/GAME IN
Back side
(yellow)
(white)
(red)
To VIDEO/GAME IN
/ .
* This section uses the following reference mark.
: Front speaker : Center speaker
: Rear speaker : Signal fl ow
: Sub woofer
®
Digital decoder
Back side
To COAXIAL DIGITAL
AUDIO OUT
Manufactured under license
from Dolby Laboratories.
Dolby and the double-D symbol
are trademarks of Dolby
Laboratories.
®
decoder
Back side
To COAXIAL DIGITAL
AUDIO OUT
Manufactured under license
under U.S. Patent #: 5,451,942 &
other U.S. and worldwide
patents issued & pending. DTS
and DTS Digital Out are
registered trademarks and the
DTS logos and Symbol are
trademarks of DTS, Inc.
© 1996-2007 DTS, Inc. All Rights
Reserved.
Back side
To COAXIAL DIGITAL
AUDIO OUT
Connecting to an optional equipment with S-video output
If you connect a VCR with an S-Video cable to the S-VIDEO IN jack on the left side of the TV/DVD, you must
also connect the audio cables to the AUDIO IN jacks as shown below. The S-Video cable only carries the video
signal. The audio signal is separated.
Select the "Video" by pressing INPUT repeatedly.
: Signal fl ow
Ex. VCR with S-Video
(playback)
To Audio (L/R) OUT To S-VIDEO OUT
S-Video cable (not supplied)
Audio cable (not supplied)
Note:
• When the S-Video cable and the standard video cable are connected at the same time, the S-video cable takes
precedence.
Connecting an optional equipment with ColorStream
®
Your TV/DVD is capable of using ColorStream (component video). Connecting your TV/DVD to a component
video compatible DVD player, such as a Toshiba DVD player with ColorStream
quality and performance.
Select the "ColorStream HD" by pressing INPUT repeatedly.
Ex. DVD player with Component video
: Signal fl ow
To COLORSTREAM HD
To Component Video OUT
To Audio (L/R) OUT
Component video cable
(not supplied)
Audio cable (not supplied)
When using the Component video cable,
an Audio cable must be connected to
COLORSTREAM HD AUDIO(L/R) IN jacks.
Note:
®
• The ColorStream (component video) inputs on this unit are for use with devices that output 480i, 1080i inter-
laced signals and 480p, 720p progressive signals.
• Refer to the owner s manual of the connected equipment as well.
• When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• If you place the unit near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the
unit away from the tuner and radio.
Connecting to optional equipment (Continued)/

Power source

Connecting to an amplifi er equipped with a digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifi er equipped with a digital audio input and speaker
system (right and left front speakers).
Note: PCM audio is limited to DVD or CD playback.
Amplifi er equipped with a
Digital audio input
To COAXIAL
type digital
audio input
Ω
75 coaxial cable (not supplied)
Note:
• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the AC-3 RF input of a Dolby Digital Receiver.
This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack
of the TV/DVD.
• Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the "COAXIAL" input of a Receiver or Processor.
• Refer to the owner s manual of the connected equipment as well.
• When you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet
before making any connections.
• The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiver s volume to a moderate listening level.
Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.
• Turn off the amplifi er before you connect or disconnect the TV/DVD s power cord. If you leave the amplifi er s power on, the speakers
may be damaged.
Power source
To use AC power source
1. Open the AC INPUT cover.
2. Connect the AC cord plug into this TV/DVD's AC INPUT jack, then close the AC INPUT cover.
3. Connect the AC cord into an AC outlet.
AC cord (supplied)
Note:
• Never connect the AC line cord plug to other than the specified voltage (120V 60Hz). Use the attached power cord only.
• If the polarized AC cord does not fit into a non-polarized AC outlet, do not attempt to file or cut the blade. It is the user's
responsibility to have an electrician replace the obsolete outlet.
• If you cause a static discharge when touching the unit and the unit fails to function, simply unplug the unit from the AC outlet
and plug it back in. The unit should return to normal operation.
• If the AC cord plug is plugged in for the first time, wait for approx. 5 seconds before pressing POWER.
Back side
To S-VIDEO IN
(white)
(red)
To VIDEO/GAME IN
To AUDIO (L/R) IN
® (Component video) output
®
can greatly enhance picture
Back side
(Y, P P ) IN
B, R
(white) (red)
To COLORSTREAM HD
AUDIO (L/R) IN
17
Back side
To COAXIAL DIGITAL
AUDIO OUT
AC Outlet
Wider Hole
and Blade
AC 120V, 60Hz
19