Mode2 - Panasonic KW4M User Manual

5-2-3 MODE2

(Mode for setting each parameter for pulse measurement.
This mode doesn't show when power measurement is selected.)
＜MODE＞+＜ A ＞
Max. counting speed setting mode
Mode defines max. counting speed.
・Select from 2kHz/30Hz
Pre-scale setting mode
Mode defines pre-scale value used for change count value.
・It can be set the range of 0.001 to 100.000. (Initial 1.000）
・The position of decimal point set with this mode is applied to count value and preset value.
ex) When 0.01 (Last 2-digit) is set, the decimal point of count value and preset value has 2 digit
under decimal point.
Unit setting mode
Mode defines unit used for count value display.
・Select from CNT/l/kl/m
Set
Display
※Count value does not change even if the unit setting is changed during counting.
Max. counting speed setting mode
・ Press <kW/kWh> to change max. counting speed.
・ Max. counting speed is selected from
Pre-scale setting mode
・ Enter pre-scale value using
<kW/kWh>,< A >,< V >,<CHARGE>,<TIME>,<COUNT>.
・ Pre-scale value can be entered the range of 0.001 to
100.000.
･ The position of decimal point set with this mode is
applied to count value and preset value.
・ Press <kW/kWh> to change unit.
・ Unit is selected from CNT→ l →kl→m3.
H z
P S C L
U N I T
3
.
CNT l
C N T

Normal display
MODE display
2000(2kHz) → 30（30Hz）.
Unit setting mode
Normal display
3
kl m
k  m 3
↓ <MODE>
↓ < A >
↓ <SET>
↓ <SET>
↓ <SET>
Factory setting / Display
Factory setting / Display
Factory setting / Display
13