Power over Ethernet (PoE)
When using a PoE switch
The Network Camera is PoE-compliant, allowing transmission of power and data via
a single Ethernet cable. Follow the below illustration to connect the Network Camera
to a PoE switch via Ethernet cable.
When using a non-PoE switch
Use a PoE power injector to connect between the Network Camera and a non-PoE
switch.
PoE Power Injector
(not supplied)
18
18
For this connection method,
the AC adapter is not used.
PoE Switch
(not supplied)
For this connection method,
the AC adapter is not used.
Non-PoE Switch
(not supplied)