Toshiba 625012200G Quick Start Manual page 15

Toshiba network camera quick start guide
Table of Contents

Advertisement

Wall mount (with the bottom base)
1. Attach the supplied alignment sticker to the wall.
2. Using the 10 circles on the sticker, drill at least 2 pilot holes symmetrically on each side into the
wall. Then hammer the four supplied plastic anchors into the holes.
3. Using the four holes on the bottom base, insert the four supplied screws to corresponding holes
and secure the bottom base with a screwdriver.
4. Feed the cables through hole A or B. If you want to use hole B, remove the rubber stopper with a
screwdriver.
5. Secure the camera base to the bottom base with three supplied screws.
3
2
4
B
5
1
A
15
15
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ik-wr12a

Table of Contents