Heat/Cool Mode Change (Kl08Rf Connection) - Salus QUANTUM SQ610RF Full User Manual

6.5 Heat/Cool mode change (KL08RF connection)

SQ610RF Quantum thermostat could be a heating device or cooling device. Default thermostat is set for heating. To
set cool mode you have to insert the jumper into „CO" terminal. Look at the instructions below:
HEATING MODE:
1
When there is no jumper at „CO" terminal KL08RF
is automatically working in heating mode.
COOLING MODE:
1
When there is jumper at „CO" terminal KL08RF
is automatically working in cooling mode.
26
2
In the application you will see orange thermostat
tile with „Flame" icon when heating mode is on.
2
In the application you will see blue thermostat tile
with „Snow" icon when cooling mode is on.
3
When thermostat is calling for
heating then icon is animating.
3
On the thermostat display you
will see „Snow" icon. When
thermostat is calling for cooling
then icon is animating.