EMl-31015D
NOTES:
1.
ingredient
data cannot be saved into CMT, PL-3 and RAM card for the TEC SL66.
2.
This setting function can be used only after designating
the PLU# by initial set g-6, 7
and 8, and selecting RAM capacity by initial set 14-4 and 5 fo secure a memory space.
Data may be damaged
if the initial set is changed
during ingredient
setting.
Initial Set 9
Initial Set 14
3.
When no data is programmed
for the PLU, ingredient cannot be set.
4.
"PLU NOT FOUND" error occurs when PLU# not registered is entered.
5.
The ingredient
to be used for SEND or RECEIVE is cleared when entering this mode.
6.
"MEMORY
FULL" error occurs when there is no memory space to register ingredient
data.
7.
Plural PLUS cannot use same ingredient
data.
(PLU and ingredient data are in pairs.)
8.
Any terminal in FUN System can transfer PLU and its ingredient data in pairs to other
terminals.
- 62 -