Before Calling Service Personnel - Toshiba TDP-D1 Owner's Manual

Before calling service personnel

If you think something is wrong, check the following before contacting customer service.
p.33
Please see "Trouble indications" as well.
If This Happens
• Is the power cord plugged in? Is it connected to the projector?
No power
• Is the lamp cover loose?
• Is the ambient temperature high?
Power goes out
during use • Is the air intake or air exhaust blocked?
No picture • Is the input source selecting properly?
• Is the mute function on?
• Is the brightness setting minimized?
• Are the connections set up correctly?
• Are all the connected devices functioning properly?
• Is a plug inserted to AUDIO OUT terminal?
No audio
• Is the mute function on?
• Is the volume setting minimized?
• Are the connections set up correctly?
• Are all the connected devices functioning properly?
• Is the input signal supported by the projector?
Picture not
• Is the correct video mode selected?
displayed
correctly • Is the correct signal format selected?
• Is the selecting of computer or Y/P
• Is there something generating an abnormal video signal, for
instance the video tape?
• Is the lens dirty?
Picture blurred
• Is the lens focus adjusted optimally?
Part of picture
out of focus • Is the projection distance within the projector's supported range?
p.17
• Is the projector's screen placement angle tilted too far?
• Are the sharpness or sampling phase adjustments off?
• Are the brightness or contrast adjustments off?
Image is dark
• Is the lamp nearing the end of its service life?
• Are the color, tint, R-level, G-level, or B-level adjustments off?
Colors too light
Bad shading • Is the screen dirty?
• Is the lamp nearing the end of its service life?
• Are the remote control's batteries drained?
Remote control
• Are the batteries inserted into the remote control correctly?
doesn't work
• Is the remote control being used within the effective range?
• Are there any obstructions between the remote control and
projector?
• Are there any fluorescent or other bright lights shining at the
projector's infrared remote sensor?
Check
p.33
p.33
p.33
p.21
p.24
p.28
p.18
p.18
p.24
p.22
p.18
p.36 p.37
,
p.23
p.23
/P input correct? p.21
B R
p.31
p.22
p.17
p.28 p.23
p.28
p.26
p.26
34
Specifications
I List of general specifications
Item
Consumption Power
Weight
External Dimensions
(including protruding parts)
Cabinet material
Conditions for usage environment Temp: 0°C to 35°C; relative humidity: 30% to 70%
Display system
Native resolution
Lens
Lamp
Projection screen size
Projection distance
Speaker
COMPUTER IN terminals
MONITOR OUT terminal Mini D sub 15 pin RGB / Y/P
S-VIDEO terminal
VIDEO terminal
AUDIO IN terminal
AUDIO OUT terminal
CONTROL terminal
USB terminal
p.28
p.16
p.16
Specification
340 W
2.4 kg
248 × 90 × 201 mm (W × H × D)
Magnesium alloy, Aluminum alloy
DLP TM (1-tip DMD TM )
1,024H × 768V XGA
Zoom lens F=2.4-2.6 f=24.19-30.65 mm
High-pressure mercury lamp
37 - 180 inches
1.5 - 6 m
1 W (Monaural)
Mini D sub 15 pin RGB / Y/P /P (dual use)
B R
/P (dual use)
B R
Mini DIN 4 pin
RCA Pin Jack, 1 V (p-p), 75 Ω
3.5 mm dia. stereo mini-jack, 1.5 V (rms); 22 kΩ or more
3.5 mm dia. stereo mini-jack, 1.5 V (rms); 8 Ω or more
Mini DIN 8 pin (RS-232C)
Type B (USB 1.1)
35