Cautions In Assembly - Sharp KS-M102 Service Manual

1. Insert a putty knife into the gap between a latch button and panel ring.
2. Push the latch button down toward the hinge side pushing a putty knife outward. (Fig. 10.)
3. The latch button and the latch spring are disengaged.
1. Setting cord reel ass'y.
Be sure to set the cord reel lead wires (blue/black) through type holes provided in the recess of the
body.
2. Affixing the display cushion.
Peel the backing from the display cushion and affix the display cushion inside the border of the
key top.
3. Installing the body.
When installing the body, make sure internal lead wires are not routed over the spacer before
tightening screws (4).
REMOVE OF LATCH BUTTON

CAUTIONS IN ASSEMBLY

16
Fig. 10.