Chapter 3
1 ) Click
Other Methods -- PIN Code
2 ) Enter your client's PIN, and then click Connect.
3 ) A success message will appear on the WPS page when the device successfully
join the access point's network.
3. 7.
Monitor the Traffic Statistics
The Traffic Statistics page displays the network traffic of the LAN, WAN and WLAN sent
and received packets, allowing you to monitor the volume of internet traffic statistics.
Note:
When working in Range Extender or Client mode, Traffic Statistics is not available.
1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to
Settings
>
Wireless
in
Wireless Stations Online
3. 8.
Wireless MAC Filtering
Note:
When working in Client mode, MAC Filtering is not available.
This feature allows you to control the wireless devices that can access the access
point, which depend on the devices' MAC addresses.
To set up a filtering entry, follow the steps below:
1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to
Settings
>
Wireless
on the WPS page, and then select
> Statistics, and then you can monitor the traffic statistics
section.
>
MAC
Filtering.
Customize Your Network
Client's
PIN.
23