Using The Vertical Edge Enhancer Feature; Using The Color Management Feature; Hmx96 (E/F) Web 213:276 - Toshiba 50HMX96 Operating Manual

HMX96_EN.book Page 56 Friday, April 28, 2006 12:03 PM

Using the Vertical Edge Enhancer feature

This function strengthens video contour by correcting the
edges of horizontal bars.
To turn on the Vertical Edge Enhancer feature:
1
Press Y and open the Video menu.
2
Highlight Advanced Picture Settings and press T.
3
Highlight Vertical Edge Enhancer and press T.
Advanced Picture Settings
Dynamic Contrast
CableClear
MPEG Noise Reduction
Color Temperature
Lamp Mode
Vertical Edge Enhancer
Color Management
Game Mode
Reset
4
In the Vertical Edge Enhancer field, select the mode
you prefer (off, Low, Middle, and High).
5
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note:
• Changing the setting of this item will cause the "Mode" to
automatically change to "Preference."
• Grayed out and set to "High" when input changed to PC.

Using the Color Management feature

The Color management feature allows you to adjust the hue,
saturation, and brightness of six colors: red, green, blue,
yellow, magenta, and cyan.
To change the Color Management settings:
1
Press Y and open the Video menu.
2
Highlight Advanced Picture Settings and press T.
3
Highlight Color Management and press T.
Advanced Picture Settings
Dynamic Contrast
CableClear
MPEG Noise Reduction
Color Temperature
Lamp Mode
Vertical Edge Enhancer
Color Management
Game Mode Color Management
Reset
56
Chapter 6: Using the TV's advanced features
4
5
ANT 1
High
Auto
6
Low
Cool
Low Power
Middle
On
Done
7
8
Note: If you select one of the factory-set picture modes
(Sports, Standard, or Movie) and then change the Color
Management to On, the picture mode automatically changes
to Preference in the Picture Settings menu.
ANT 1
High
Auto
Low
Cool
Low Power
Middle
Off
Done
In the Color Management field, select On.
Color Management
Color Management
Hue Saturation
Red –15 +15
Green
0
Blue
–15 +15
Yellow
0
Magenta
–15 +15
Cyan 0
Reset Done
Press B or b to highlight the color you want to adjust, and
then press T.
Press B or b to select either Hue, Saturation, or
Brightness, and then press C and c to adjust the setting.
Hue +2
Saturation +2
Brightness +2
Press T to return to the Color Management window.
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
ANT 1
On
Brightness
0
0 0
0
0 0
0
0
0

HMX96 (E/F) Web 213:276