Learning About The Remote Control - Toshiba 50HMX96 Operating Manual

HMX96_EN.book Page 12 Friday, April 28, 2006 12:03 PM

Learning about the remote control

The buttons used for operating the TV only are described here.
For a complete list of the remote control's functions, see the
remote control functional key chart (- pages 14–15).
For a list of the buttons that operate the TV Guide On Screen
system, see the separate TV Guide On Screen
Program Guide.
Note: The error message "Not Available" may appear if you
press a key for a function that is not available.
12
Chapter 2: Using the remote control
1 LIGHT illuminates the keypad for five seconds.
The MODE SELECT key that is being selected blinks
three times.
2 SLEEP accesses the sleep timer (
3 POWER turns the TV on and off. when the TV is on, the
blue LED indicator on the TV front will be illuminated.
™
™
Interactive
Note: The Quick Restart
time it takes for the picture to appear when you turn on the
TV (- page 30).
4 MODE SELECT sets the six remote control device
modes: TV, CABLE/SAT, DVD, VCR/PVR, AUX 1,
and AUX 2. Press TV until the keypad blinks 3 times to
control the TV.
The selected MODE key blinks each time the any key is
pressed. (
5 Channel Numbers (0–9, –/100) directly tune
channels. The = button is used to tune digital channels
( - page 35) or to edit the Favorite List (
6 INPUT selects the video input source (
7 FAV BROWSER accesses the Favorites List in the
Channel Browser
8 MENU accesses the main TV menu system (
and 23) or opens a menu in the TV Guide On Screen
system (
Guide).
9 ENTER activates highlighted items in the main menu
system and the TV Guide On Screen
10 THINC accesses the THINC menu (
11 PAGE + - When the TV Guide On Screen
open, moves from one set of screen information to the
next, when applicable.
12 TV GUIDE opens the TV Guide On Screen
( - TV Guide On Screen
13 3 C / # c While watching TV, these buttons open the
Channel Browser banner and tune to the previous/next
channel in the channel history (- page 34). (Also see
"Arrow buttons.")
14 Arrow buttons (BbC c) When a menu is on-screen,
these buttons select or adjust programming menus. (Also
see 3 C / # c.)
15 VOL + - adjusts the volume level.
16 CH Bb cycles through programmed channels when no
menu is on-screen (
down when a menu is on-screen or when the TV Guide
On Screen
Interactive Program Guide).
-
page 51).
™
setting will affect the amount of
-
page 16).
-
™ -
( page 33).
- TV Guide On Screen ™ Interactive Program
™ system.
-
page 24).
™ Interactive Program Guide).
- page 26), and functions as page up/
™ system is open ( - TV Guide On Screen
HMX96 (E/F) Web 213:276
- page 33).
page 32).
-
pages 22
™
™ system is
™
system
™