Learning About The Remote Control - Toshiba 57HX84 Service Manual

Learning about the remote control

The buttons used for operating the TV only are described here. For a
complete list of the remote control's functions, see the "Remote
Control functional key chart".
turns the TV on and off
POWER
allows access to the automatic TV shut-off function
SLEEP
The first press of the LIGHT button lights the keypad and turns
LIGHT
on the Illumination mode. With the Illumination mode on,
pressing any other key lights the keypad for 5 seconds (10 seconds
if you're in programming mode).
Subsequent presses of the LIGHT button toggle between turning
the Illumination mode on and off.
Channel Numbers (0-9, 100)
cycles through the six device modes: TV, CABLE/SAT, VCR,
MODE
DVD, AUDIO1, and AUDIO2. The mode indicator light will
remain lit for a few seconds .
cycles through the five pictures sizes: Natural, Theater Wide 1,
PIC SIZE
2, 3, and Full
allows access to the favorite channel search function
FAVORITE
allows access to on-screen programming menus
MENU
sets programming menu information
ENTER
select or adjust programming menus
cycles through favorite channels
FAV
cycles through programmed channels
CH
adjusts the volume level
VOL
exits the programming menus
EXIT
selects the video input source
INPUT
mutes the sound
MUTE
displays on-screen information
RECALL
returns to the last viewed channels
CH RTN
selects the POP (picture-out-picture) channel
POP CH
turns the POP feature on and off
SPLIT
allows access to the programmed channel search function
CH SCAN
freezes the picture. Press again to restore the picture.
FREEZE
switches the main and POP pictures
SWAP
allows direct access to POP channels
POP DIRECT CH
selects the POP picture source
SOURCE
allow direct access to channels
Note:
The error message "Not Available" will appear
if you press a key for a function that is not
available.
- 23 -