Chapter 6: Configuring Fiery Webtools; Configuring The Ga-1120 And Clients For Webtools - Toshiba GA-1120 Configuration Manual

6
6-1 Configuring the GA-1120 and clients for WebTools
Chapter 6:
Configuring
Fiery WebTools
T
O SET UP
1. In GA-1120 Network Setup, enable TCP/IP.
2. Set a valid, unique IP address for the GA-1120, and then set the subnet mask.
3. Enable Web Services.
4. In GA-1120 Printer Setup, confirm that the Print Queue is published.
T
O SET UP
1. Enable TCP/IP networking.
2. Assign the workstation a valid, unique IP address and subnet mask, and a gateway
3. Install an Internet browser that supports the Java language and frames.
Fiery WebTools allow you to manage your GA-1120 remotely from the Internet or
from your company's intranet. The GA-1120 has its own home page, from which you
can select a variety of functions, including Status, WebSetup, WebSpooler, WebLink,
Installer, WebScan, and WebDownloader.
For more information on using WebTools, see the
Configuring the GA-1120 and clients for WebTools
The WebTools provide access to many GA-1120 functions via the Internet (or
intranet), providing additional flexibility in remote management. You can access
the WebTools from a Windows or Mac OS computer.
W T GA-1120
EB OOLS ON THE
Set a gateway address, if required.
W T
EB OOLS ON A COMPUTER
address, if required.
Make sure Java is enabled. For more information on supported browsers and
WebTools requirements, see the
Printing Guide.
User Software Installation Guide.