Toshiba B-EP2DL Owner's Manual page 14

How to attach the accessories
CAUTION!
Care should be taken not to drop the printer when securing it to your waist.
Belt Clip
When you use the printer fixing to your belt, secure
the supplied Belt Clip to the printer back.
1. Secure the Belt Clip to the printer back with the
two screws.
2. Fasten the Belt Clip to your belt.
Shoulder Strap (Option)
Use the following procedure to fasten an optional
shoulder strap (B-EP900-SS-QM-R) to the printer.
1. Pass either end of the Shoulder Strap through the
Strap Slot of the printer, as shown in the figure
below.
2. Pass the end of the Shoulder Strap through the
buckle. Slide the buckle to adjust the Shoulder
Strap length.
3. Do the same to the other end of the Shoulder
Strap.
Belt
Strap Slot
Screw
Belt Clip
Belt Clip
Shoulder Strap
Buckle