ELECTRICAL WIRING
Electric cables passage
Connect all wires and cables in compliance with the law.
The electrical cables must not touch any parts that may overheat during use (such as the motor and transformer).
Input voltage
Make sure the mains power supply is disconnected during all installation procedures.
Before working on the control panel, cut off the mains power supply and remove any batteries.
Connection to the power grid (120/230 V AC - 50/60 Hz)
110 / 230 V AC - 50/60 Hz
Accessories power supply output
Output delivers normally 24 V AC.
The output delivers 24 V DC when the batteries start
operating.
The sum of the connected accessories input must
not exceed the 40W.
L
N
24 0
10 11 E
5