Specifications - Blaupunkt LIMA CR 47 Operating Instructions Manual

Specifications

Audio Power Specifications
Power Output and Total Harmonic Distortion: 5.5 watts per channel minimum continuous
average output into 4 ohms, 4 channels driven, from 35-15 000 Hz.
Other Specifications
Tuner
FM
Tuning Range:
FM Mono Sensitivity:
Signal-to-Noise Ratio:
Frequency Response:
AM
Tuning Range:
Signal-to-Noise Ratio:
Frequency Response:
Cassette
Signal-to-Noise Ratio:
Tape Wow and Flutter:
Tape Frequency Response:
Audio
Speaker Impedance:
Maximum Amp Power:
RMS Power:
Bass Control:
Treble Control:
Loud:
General
Dimensions (w/o projecting parts/controls):
Mass:
Power Requirement (neg. grnd.):
Operating Temperature:
Supplied Accessories:
Design and specifications subject to change without notice.
32
87.5 - 108 MHz
1.3 µV
65 dB (stereo), 70 dB (mono)
35-15 000 Hz
531 - 1602 kHz
50 dB
35-5 000 Hz
55 dB
0.3 %
35-15 000 Hz
4-8 ohms
4 X 10 watts (at 4 ohms)
4 X 5.5 watts (at 4 ohms)
acc. to DIN 45 325 at 14.4 volts
± 10 dB at 100 Hz
± 10 dB at 10 kHz
+ 8 dB at 60 Hz
+ 2 dB at 8 kHz
179 x 50 x 150 mm
Approx. 1.4 kg
12 V DC car battery (11-16 V DC allowable)
-10°C to 50°C
• Unit
• Faceplate
• Wire Harness
• DIN Sleeve
• Mounting Hardware
• Owner's Manual