Cassette Tape Player Operation - Blaupunkt LIMA CR 47 Operating Instructions Manual

Cassette Tape Player Operation

Tape Playback:
• Insert cassette into Cassette Door. (Note: Make sure that the side of the cassette exposed is
facing right and that all slack has been removed from the tape prior to insertion.)
• If ignition switch is already in "on" or accessory position, insertion of cassette will turn unit
on. If unit already turned on, cassette insertion will override other audio source, such as
radio. "LOAD" appears for 2 seconds. Cassette play will begin, and the display will indicate
which tape program is in use, "1" or "2".
• The tape will continue to play until ejected, SRC button pressed, or unit turned off.
Ejecting The Tape
Press the button completely towards the face of the unit. The tape will eject. If uit is turned on,
"EJ" will appear in the display for 2 seconds and the last-heard radio station will play.
Tape Program Change
• Automatic Change (Autoreverse): When the end of the tape is reached, the unit will
automatically reverse direction and play the other side of the tape.
• Manual Change: To manually reverse tape direction, press both PROG (program) Buttons
(FR and FF) at the same time.
• The change in direction and in tape program will be confirmed in the display ("1" or "2").
Fast Winding
• To Fast-Rewind the tape, press the FR Button. Tape rewinds and
• To Fast-Forward the tape, press the FF Button. Tape fast-forwards and
display.
• To stop fast-winding, press the other fast winding button, FR or FF.
Radio Monitor
During tape winding, the radio will play the most-recently heard radio frequency. All frequencies
stored on the current bank of preset stations are accessible during fast winding.
30
blinks in the display.
blinks in the