Product Outline; Configuration - Sharp AR-MS1 Service Manual

[1] PRODUCT OUTLINE

This unit is a paper exit unit, which allows to select a desirable tray in two or more paper exit trays (male bins), when installed to the following machines.
Applicable models AR-P350 / P450, AR-M350 / M450

[2] CONFIGURATION

1. Before installation of this unit, one of the multi-purpose tray (AR-MU1), the large capacity paper feed desk (AR-D13), and the 3-stage paper feed
desk (AR-D14) must be installed.
2. When installing this unit together with the AR-MJ1, it may be required to install the optional power unit (AR-DC1) together.
3. This unit cannot be installed together with the finisher (AR-FN6) or the paper exit extension tray (AR-TE4) .
Exit tray
(AR-TE3 or AR-DU4 Standard)
Saddle stitch
finisher
(AR-FN7)
Output units
Mail-bin stacker
*1
=Any of the units must be installed together.
B/W scanner module/DSPF(AR-EF1)
Duplex
module/bypass tray
(AR-DU4)
Duplex module
(AR-DU3)
Multi purpose drawer
Stand/3 x 500 sheet
paper drawer
(AR-D14)
AR-MS1
AR-MS1 PRODUCT OUTLINE, CONFIGURATION 1-1
Simultaneous installation not allowed
Upper exit tray
extension
(AR-TE4)
(AR-MU1)
Stand/MPD & 2000 sheet
Power supply unit
(AR-DC1)
Simultaneous installation is required
*1
Finisher
(AR-FN6)
Mail-bin stacker
(AR-MS1)
paper drawer
(AR-D13)