Software Upgrade; Figure 34: Firmware Upgrade And Provisioning - Grandstream Networks GXV3500 User Manual

SOFTWARE UPGRADE

This page allows user to configure firmware upgrade:
Software upgrade can be done via TFTP, HTTP or HTTPS. The corresponding configuration settings are in
the ADVANCED SETTINGS configuration page.
Notes:
•
Grandstream recommends end-user use the Grandstream HTTP server:
firmware.grandstream.com
•
For large companies, we recommend to maintain their own TFTP/HTTP/HTTPS server for
upgrade and provisioning procedures. Instructions for local firmware upgrade using TFTP
server:
1. Unzip the file and put all of them under the root directory of the TFTP server.
2. Load the TFTP server from the PC and make sure the device in the same LAN segment.
3. Please go to File -> Configure -> Security to change the TFTP server's default setting from "Receive
Only" to "Transmit Only" for the firmware upgrade.
4. Start the TFTP server.
5. In webGUI of IP camera, configure the Firmware Server Path with the IP address of the PC.
6. Update the change and reboot the unit
End users can also choose to download the free HTTP server from http://httpd.apache.org/ or use Microsoft
IIS web server.

Figure 34: Firmware Upgrade and Provisioning

GXV3500 User Manual
Version 1.0.3.6
P a g e | 57