Table of Contents
Advertisement
72
Getting Started
Connecting a local printer
4
If the printer you are setting up:
❖
❖
5
Click Next.
The Add Printer Wizard looks for a Plug and Play printer. If it
does not locate one, click Next.
The Add Printer Wizard prompts you for the printer port.
6
Select the port settings according to the instructions in
your printer's documentation and the port to which your
printer is connected, then click Next.
The wizard prompts you to select your printer.
7
From the list of manufacturers and printers, select your
printer, then click Next.
The Add Printer Wizard prompts you to enter a "friendly"
printer name.
8
Enter a name for your printer.
9
If you want this printer to be:
❖
❖
10
Click Next.
11
Click Finish.
The Windows
Is not connected to a network, select Local printer
attached to this computer.
Is connected to a network, select Network printer, or a
printer attached to another computer.
HINT: If you are using more than one printer, make sure the
name is descriptive enough to help you tell the difference.
The default printer, click Yes.
Available when specifically requested, click No.
®
XP operating system prints a test page.
Advertisement
Table of Contents
