Table of Contents
Advertisement
•
Edit Name: Menu selection number 1 allows you to change the point's
name. For example, the bottom of Figure 13 shows an example of
changing point #1's name to output_voltage. The point's name is
purely for user recognition of a point, and has no bearing upon
communications functionality. To clear the point's name field, just
enter the menu selection ("1") with no additional argument.
•
Edit Timeout Enable: Menu selection number 2 allows you to change
the point's timeout enable selection. Refer to section 11.2 for more
information about timeout processing.
•
Edit Timeout value: Menu selection number 3 allows you to change
the point's timeout data value. Refer to section 11.2 for more
information about timeout processing.
•
Edit Source Port: Menu selection 4 allows you to change the point's
source port. Refer to section 11.3 for more information about source
ports.
•
Edit Toshiba, Mitsubishi, Modbus, Metasys: Menu selections 5-9
allow you to edit/view protocol-specific point attributes. Enter the
menu selection corresponding to the protocol you wish to edit/view.
Figure 13: Edit a Point
33
Advertisement
Table of Contents
