Table of Contents
Advertisement
The radio will operate again as soon as you
have entered the right code number.
If you lose your radio passport and have
forgotten your code number, you will not be
able to restart the set after the power supply
has been interrupted. In this case, your radio
can only be reset in our central customer
service workshop or in one of our service
agencies abroad.
Switching the code system on
Precondition:
The radio must be connected to permanent
power.
In order to switch the code system on:
•
Turn the radio off.
•
Hold down the preset buttons 1 and 4
simultaneously.
•
Turn the radio on.
"CODE" briefly appears before the ra-
dio begins to operate.
•
Release preset buttons 1 and 4.
The code system is on.
"CODE" will be briefly displayed each time
the radio is turned on.
18
Restart following interruption of
power supply
(Code system switched on)
•
Switch on the set.
"CODE" will appear in the display.
•
Briefly press preset button 1, "0000" will
appear in the display.
•
Enter the code number given in the
Blaupunkt car radio passport:
Example: the code number is 2521.
- Press preset button 1 twice, "2000"
appears in the display.
- Press preset button 2 five times,
"2500" appears in the display.
- Press preset button 3 twice, "2520"
appears in the display.
- Press preset button 4 once, "2521"
appears in the display.
•
To confirm the code number:
Press the upper part of the rocker
switch
.
Your car radio is now ready for operation.
If four dashes appear again in the display,
you have entered a wrong code number.
Now it is essential to enter the correct code
after the waiting period has elapsed (CODE
in the display).
If the radio is turned off before the waiting
period has elapsed, then the waiting period
restarts as soon as the radio is turned on
again.
Switching the code system off
•
Turn off the radio.
•
Simultaneously press preset buttons 1
and 4 and hold them down.
•
Turn the set on.
"CODE" will appear in the display.
•
Enter the code number given in the
Blaupunkt car radio passport and con-
firm: See example "Restart following
interruption ...".
The code system is now deactivated.
Optical indication of theft protec-
tion
When the car is stationary, an optical security
system in the form of a flashing LED can be
activated to visualize that your radio is code-
protected.
Depending on how you have hooked up your
radio, three different LED modes are
available, which can be programmed with the
DSC function.
See "DSC programming" for more details.
Hide quick links:
Advertisement
Table of Contents
