Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Blaupunkt HEILBRONN RCC 24
Summary of Contents for Blaupunkt HEILBRONN RCC 24
- Page 1 Operating instructions Heilbronn RCC 24...
-
Page 3: Table Of Contents
Contents Short description ... 15 Important information ... 17 What you need to know! ... 17 Traffic safety ... 17 Installation/connection ... 17 Anti-theft coding ... 17 Wrong code number entered ... 17 Switching the code system on ... 18 Restart following interruption of power supply ... -
Page 4: Short Description
Short description 1 Amplifier Volume When “CODE” lights up in the display, read chapter “Anti-theft coding” first. SCAN Hold down for approximately 1 second to sample all stations to be received. 2 Rocker switch Seek tuning down in up in short steps short steps down... - Page 5 7 Display Waveband Station name/ frequency Memory bank Preset button Tuning sensitivity Alternative frequency Priority of traffic announcements Traffic program identifier Stereo symbol 8 1, 2, 3, 4, 5, 6 - preset buttons You can store 6 stations on each FM memory bank (I, II, III and T).
-
Page 6: Important Information
Do not connect the loudspeaker outputs to ground! Only use the accessory and replacement parts approved by Blaupunkt. Anti-theft coding The car radio comes standard with the code system deactivated. If the anti-theft coding system is on while the power supply to the unit is interrupted (e.g. -
Page 7: Switching The Code System On
Turn the set on. “CODE” will appear in the display. • Enter the code number given in the Blaupunkt car radio passport and con- firm: See example “Restart following interruption …”. The code system is now deactivated. Optical indication of theft protec-... -
Page 8: Radio Operation With Rds
Radio operation with RDS An ever increasing number of FM radio sta- tions broadcast addition information in paral- lel to their normal program via the Radio Data System to make reception even more con- venient. As soon as radio programs can be identified, the station name and possibly the regional identifier are in the display, e.g. -
Page 9: Adjusting The Seek Tuning Sensitivity
Adjusting the seek tuning sensi- tivity Two basic levels can be selected for the seek tuning sensitivity. If “lo” is displayed, the radio will only tune to strong stations (low sensitivity). If “dx” is displayed, you will also receive less powerful stations (higher sensitivity). -
Page 10: Recalling Stored Stations
Recalling stored stations You can recall any stored station by pressing the corresponding preset button. • Use the FM or TS button to select the desired memory bank. For this purpose, press FM until the desired memory bank is indicated in the display. -
Page 11: Reception Of Traffic Announcements With Rds-Eon
Reception of traffic announcements with RDS-EON Many FM broadcasters provide their service area with up-to-date traffic messages at re- gular intervals. All traffic program stations transmit a special signal in parallel to the radio program. Your car radio is able to identify such traffic pro- gram station by this TP signal. -
Page 12: Tape Operation
Tape operation Inserting a tape • Turn the set on. • Insert a tape. Fast Forward Insert tape with Start/stop: side A or 1 facing up, Press button briefly the open side facing to the right Press button firmly to eject the tape When listening to a tape, the display shows “TAPE”. -
Page 13: Survey Of Dsc Default Settings
LOUD Loudness - To boost low bass frequencies. LOUD 0 - no boost LOUD 6 - strong boost BEEP Acknowledgement tone for function keys to be hold down for more than 2 seconds. Ad- just volume between 0 and 9 (0 = OFF). - Page 14 6/94 Blaupunkt-Werke GmbH Bosch Gruppe K7/VKD 3 D94 162 017...