Table of Contents
Advertisement
Individual settings
en
0
Individual settings
°C (Temperature)
I n d i v i d u a l s e t t i n g s
The indicated washing temperature can
be changed. The maximum selectable
washing temperature varies depending
on the selected programme.
Overview of programmes ~ Page 15
0 (Spin speed)
0: The spin speed can be changed
before and during the programme (in
rpm, revolutions per minute) depending
on the progress of the programme.
Setting - - - - (Rinse stop = without final
drain/spin cycle), laundry remains in the
water after the last rinse cycle.
Setting 0 (Without any spin cycle), drain
the rinsing water only, no spin cycle.
The maximum spin speed depends on
the programme and model.
Overview of programmes
5 (Finish in)
Delays the Finish in time (end
of programme).
When you select a programme,
Note:
the respective programme duration is
displayed. The finish-in time indicates
when the programme will be finished. It
can be set in hour increments up to a
maximum of 24h. Press and hould the
5 (Finish in) button until the required
number of hours is shown(h=hour).
Select Start/Reload.
18
\
Additional options
/
(speed/eco)
A d d i t i o n a l o p t i o n s
For washing in a shorter time with a
washing result comparable to that of the
standard programme.
(Less iron )
Special spin sequence with subsequent
fluffing. Gentle final spin – residual
moisture in the laundry increased
slightly.
Rinse plus
Additional rinse cycle. Prolonged
programme duration. For areas with
very soft water or for further improving
the washing result.
Advertisement
Table of Contents
