Data Verification - Toshiba QOSMIO F60 User Manual

Toshiba laptop user manual
Hide thumbs Also See for QOSMIO F60:
Table of Contents

Advertisement

You might not be able to use the 'Disc Backup' function of TOSHIBA
Disc Creator to back up a DVD-R, DVD-R (Dual Layer), DVD-RW,
DVD+R, DVD+R (Double Layer) or DVD+RW disc that was made with
other software on a different optical media recorder.
If you add data to a DVD-R, DVD-R (Dual Layer), DVD+R or DVD+R
(Double Layer) disc that you have already recorded to, you might not be
able to read the added data under some circumstances. For example, it
cannot be read under 16-bit operating systems, such as Windows 98SE
and Windows Me, while in Windows NT4 you will need Service Pack 6
or later, and in Windows 2000, you will need Service Pack 2. In addition
to this, some DVD-ROM and DVD-ROM / CD-R/RW drives cannot read
this added data regardless of the operating system.
TOSHIBA Disc Creator does not support recording to DVD-RAM discs -
to achieve this you should use Windows Explorer or another similar
utility.
When you back up a DVD disc, be sure that the source drive supports
recording to DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R
(Double Layer) or DVD+RW media - if this is not the case then the
source disc might not be backed up correctly.
When you back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R,
DVD+R (Double Layer) or DVD+RW disc, be sure to use the same type
of disc.
You cannot partially delete any data written to a CD-RW, DVD-RW or
DVD+RW disc.

Data Verification

To verify that data has been written or rewritten correctly to a data CD/DVD
you should follow the steps below before you begin the write/rewrite
process:
1. Click Start -> All Programs -> TOSHIBA -> CD&DVD Application ->
Disc Creator to access the TOSHIBA Disc creator utility.
2. Open the Data CD/DVD Setting dialog box by one of the following
methods:
3. Mark the Verify written data check box.
4. Select File Open or Full Compare mode.
5. Click the OK button.
User's Manual
Click the Recording settings button (
toolbar in the Data CD/DVD mode.
Select Settings for Each Mode -> Data CD/DVD in the Setting
menu.
Operating Basics
) for writing on the main
4-19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Qosmio f60 series

Table of Contents