Siemens SIMOCODE DP Programming And Operating Manual page 44

SIMO_CHN Function
3.6 Display in WinCC
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
In the SIMOCODE-DP "Overload" (OVL) control function, the display of operating mode,
station, command, and monitoring is disabled. In SIMOCODE-DP control function "Direct
starter (DIR), Star / Delta(STAR), Soft starter (SOFT), and Solenoid valve (VALVE), the
operation of the ON1 command is disabled.
In the symbol picture and the standard view, a device failure is indicated by a change of
color in the status display.
All inputs require operator level5. Operator enabling at login is through the direct connection
of picture element @Level5 (Operator Enabling) -> Permissions (Operator Enabling). The
operator enabling and background colors for the other I/O fields are then defined in the
"Permissions" picture element by means of a C-script.
44
SIMOCODE-DP control function (SIMO_TXT)
SIMO_STAT
Current (CUR) and Unit (CUR#unit)
Active command (QOFF, QON1, QON2)
Watchdog (QMON_ERR, SIMO_OVL)
SIMOCODE-DP general fault (QG_FLT) or SIMOCODE-DP general warning (QG_WRN)
Simulation active (QSIM)
Test (RMT) active (QCST)
Remote active (QREMOTE, SIMO_OVL)
Cooling time running (QCTA) or Lock time active (QLTA)
SIMOCODE DP PCS 7 Library Migration (Legacy) - V9.0 SP2
Programming and Operating Manual, 09/2019, A5E48307694002A/RS-AA/001