Vstatus And Vstatus1 Status Display - Siemens SIMOCODE DP Programming And Operating Manual

SIMO_CHN Function
3.5 Description of Parameters
3.5.5

VSTATUS and VSTATUS1 Status Display

The most important statuses and enable signals are passed through VSTATUS and
VSTATUS1.
VSTATUS Bit_31:=QCSF;
VSTATUS Bit_30:=QOFF;
VSTATUS Bit_29:=QON2;
VSTATUS Bit_28:=QON1;
VSTATUS Bit_27:=QCUR;
VSTATUS Bit_26:=QG_FLT;
VSTATUS Bit_25:=QG_WRN;
VSTATUS Bit_24:=Q1_2;
VSTATUS Bit_23:=Q1_3;
VSTATUS Bit_22:=Q1_4;
VSTATUS Bit_21:=Q1_5;
VSTATUS Bit_20:=QMAN_AUT;
VSTATUS Bit_19:=QREMOTE;
VSTATUS Bit_18:=QCST;
VSTATUS Bit_17:=QSIM;
VSTATUS Bit_16:=LOCKED;
VSTATUS1 Bit_31:=QAUTOP;
VSTATUS1 Bit_30:=QMANOP;
VSTATUS1 Bit_29:=QMANLOP;
VSTATUS1 Bit_28:=QLOCOP;
VSTATUS1 Bit_27:=QON2OP;
VSTATUS1 Bit_26:=QON1OP;
VSTATUS1 Bit_25:=QOFFOP;
VSTATUS1 Bit_24:=QMONITOR;
VSTATUS1 Bit_23:=QMSG_SUP;
VSTATUS1 Bit_22:=QENSDCS;
VSTATUS1 Bit_21:=not used;
VSTATUS1 Bit_20:=not used;
VSTATUS1 Bit_19:=not used;
VSTATUS1 Bit_18:=not used;
VSTATUS1 Bit_17:=not used;
VSTATUS1 Bit_16:=not used;
40
VSTATUS Bit_15:=LOCK;
VSTATUS Bit_14:=LOCK_ON;
VSTATUS Bit_13:=LOCK_OPT;
VSTATUS Bit_12:=VL_OPEN;
VSTATUS Bit_11:=VL_CLOSE;
VSTATUS Bit_10:=VL_HOLD;
VSTATUS Bit_09:=SS_POS;
VSTATUS Bit_08:=QCTA;
VSTATUS Bit_07:=QLTA;
VSTATUS Bit_06:=QOVL;
VSTATUS Bit_05:=QADD_F1;
VSTATUS Bit_04:=QADD_F2;
VSTATUS Bit_03:=Q1_6;
VSTATUS Bit_02:=Q1_7;
VSTATUS Bit_01:=QMON_ERR;
VSTATUS Bit_00:=QMAN_MOP;
VSTATUS1 Bit_15:=not used;
VSTATUS1 Bit_14:=not used;
VSTATUS1 Bit_13:=not used;
VSTATUS1 Bit_12:=not used;
VSTATUS1 Bit_11:=not used;
VSTATUS1 Bit_10:=not used;
VSTATUS1 Bit_09:=not used;
VSTATUS1 Bit_08:=not used;
VSTATUS1 Bit_07:=PLC CPU monitoring;
VSTATUS1 Bit_06:=Reset;
VSTATUS1 Bit_05:=REMON_OP;
VSTATUS1 Bit_04:=QEM_START;
VSTATUS1 Bit_03:=OverloadTest;
VSTATUS1 Bit_02:=On2;
VSTATUS1 Bit_01:=Off;
VSTATUS1 Bit_00:=On1;
SIMOCODE DP PCS 7 Library Migration (Legacy) - V9.0 SP2
Programming and Operating Manual, 09/2019, A5E48307694002A/RS-AA/001