Advertisement
Quick Links
MODEM SET UP
Set up your new modem with these easy steps.
HITRON 4589 WIRELESS MODEM
(SWAP FROM ROUTER AND MODEM)
Get the most out of your entertainment experience and follow these instructions.
DIFFICULTY
TIME TO COMPLETE
Easy
GETTING PREPARED
1.
Retrieve your current wireless network name and password for the Linksys e1500 router. If you need to
recover your current wireless network name and password:
Log into the router with a web browser. The address is
Login is username: admin; password: admin
Navigate to Wireless > Wireless Security and you can see the wireless password.
NOTE: Be sure to write down your current wireless network name and password.
You will need it for your new, all-in-one modem.
DO YOU HAVE PHONE SERVICE WITH ATLANTIC BROADBAND?
If you are an Atlantic Broadband phone customer, you must call Atlantic Broadband at
1-844-579-0694 BEFORE disconnecting any equipment. An agent will need to assist you in
swapping your phone modem to avoid an interruption to your phone service.
If you don't receive phone service from Atlantic Broadband you may proceed with these
instructions.
Under 15 Minutes
REQUIRED EQUIPMENT
Computer, current modem and router, new router
http://192.168.1.1
Advertisement
Related Manuals for Hitron 4589
Summary of Contents for Hitron 4589
- Page 1 MODEM SET UP Set up your new modem with these easy steps. HITRON 4589 WIRELESS MODEM (SWAP FROM ROUTER AND MODEM) Get the most out of your entertainment experience and follow these instructions. DIFFICULTY TIME TO COMPLETE REQUIRED EQUIPMENT ...
- Page 2 REMOVE OLD EQUIPMENT Locate your current modem and wireless router provided by Atlantic Broadband. Unplug the modem from its power source. Unplug the wireless router from its power source. Disconnect the cable line from the back of the modem. NOTE: Do not disconnect the other end of the cable line from the wall or from any splitters. ...
- Page 3 Place the old modem and wireless router aside. You can dispose of your old modem and wireless router or recycle them at a local electronics recycling center - there is no need to return them to us. CONNECT NEW EQUIPMENT Remove your new modem and power cord from the box.
- Page 4 The new modem will update itself once connected, which may take 5-10 minutes. Once you see the top 4 lights glowing steady on the device, it is ready to use. ACTIVATE YOUR MODEM To activate your new modem, you’ll need to connect a computer to the new modem with the Ethernet cord or via WiFi using the default wireless network and password on the label on the back of the new modem.
-
Page 5: Need Assistance
Once your device is connected, an Easy Connect setup prompt will appear. If it does not load after opening go to http://192.168.0.1 your web browser, Enter the wireless network name and password that you retrieved from your previous wireless router during the Preparation step, then click Confirm Setup.