Storing Stations Automatically (Travelstore); Listening To Preset Stations; Scanning Receivable Stations (Scan); Setting The Scantime - Blaupunkt CD51 Operating Instructions Manual

RADIO MODE
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions with the strongest reception in the
region. The stations are stored in the
FMT or AM memory depending on the
selected frequency range.
Note:
Stations that were previously
stored in this memory are deleted
in the process.
Briefly press the TS button ?.
The station storing procedure begins.
"TRAVEL-STORE" appears in the dis-
play. After the process is completed, the
station that is stored in location 1 of the
respective memory level will be played.

Listening to preset stations

Select the memory level on which
the station was stored.
Press the preset station button 1-6
> of the station you want to listen
to.
Scanning receivable stations
(SCAN)
You can briefly play all the receivable
stations. You can set the scanning time
to between 5 and 30 seconds in the
menu.
Starting SCAN
Keep the OK button ; pressed
until the scan process starts.
"SCAN" appears briefly in the display
followed by the current frequency (which
flashes).
12
Stopping SCAN and continuing
listening to a station
Press the OK button ;.
Scanning is stopped and the station that
was tuned into last will remain active.

Setting the scantime

Press the MENU button 8.
Keep pressing the
: until "SCANTIME" appears in
the display.
Set the required scantime using
buttons :.
the and
When you have finished making your
changes,
press the MENU button 8 or OK
; twice.
Note:
The set scantime also applies to
scanning in CD and CD changer
mode.

Tuner configuration

This unit is equipped with a multiband
tuner. The tuner can be configured to
suit the requirements that are specific
to various countries. The countries/re-
gions available are: America, Europe,
Asia and Thailand. The tuner will only
function optimally if it is configured for
the country/region in which the unit is
being operated.
Configuring the tuner
Press the MENU button 8.
Keep pressing the
: until "FM TUNER" appears in
the display.
or button
or button