Storing The Station Names - Blaupunkt KEY WEST CD169 Owner's Manual

Storing the station names

You can assign a name to each radio station and store it in
memory. As many as 30 station names can be stored, com-
posed with 8 characters each.
Storing the station names
1.
Tune in a station whose name you want to store.
2.
Press the for more than 2 seconds.
DISP
The " NAME EDT " will light then the " _ _ _ _ _ _ _ _ " on
the display window. The first " _ " flashes.
3.
Enter the characters.
A. Rotate the dial in a clockwise direction to select the
desired characters.
( A B C . . . Z
0 1 2 3...9 " "Space )
B. Press the to move the flashing cursor to
TUN/ TRK
the next position. If you press
ing cursor moves to the left.
C. Repeat steps A and B to complete entering the
entire name 8 characters max.
Tip
To erase/correct a name, press the
2 seconds to clear the character and re-enter.
4.
Press the to store the station name.
MUTE / SENS
The station name flashes.
5.
To return to the normal radio reception, Press
Erasing the station names
1.
Tune in any station and press the
seconds.
2.
Press the .
MUTE / SENS
The station name or " _ _ _ _ _ _ _ _ " is now flashing.
3.
Rotate the dial to select the name of the station that you
want to erase. To erase all the name of the station, dis-
play " ALL DEL ".
4.
Press the for more than 2 seconds.
DISP
Repeat steps 3. and 4. if you want to erase other names.
5.
To return to the normal radio reception, Press
Direct Access to Memorized Stations via
Station Call
You can search for the memorized AM & FM station names in
the memory.
1.
Press the
play window.
2.
Rotate the large dial to select the desired station name.
3.
Press the
Level Meter selection
The meter displays can be selected from four types.
You can select :
, the flash-
TUN/TRK
• METER 1 : Type that the level meter goes upward.
• METER 2 : Type that only the very top segment lights.
• METER 3 : Type that the remaining segments light. (op-
• METER 4 : Type that the level meter goes up and down
for more than
DISP
• METER 0 : No meter is indicated.
1.
Press the
window.
.
DISP
2.
Rotate the dial to select the desired meter indication.
METER 1
TER 0
for more than 2
DISP
L-ch Level meter
.
DISP
to display the " STN CALL " on the dis-
DISP
to tune in the desired station.
MUTE / SENS
posite of METER 2)
dividing from the center segment.
to display the " METER 1 " on the display
DISP
METER 2 METER 3 METER 4
R-ch Level meter
E-5
Level Meter Sensitivity selection
The sensitivity of the level meter display can be switched.
You can select :
• LEVEL 1 : Normal sensitivity
• LEVEL 2 : High sensitivity
1.
Press the to display the " LEVEL 1 " on the display
DISP
window.
2.
Rotate the dial to select the desired meter sensitivity.
LEVEL 1 Ô Ô LEVEL 2 Ô Ô Ô
Enhancing the bass sound
For extended bass centered @ 72Hz, the XBASS function
can be set for either each band and CD mode.
You can select :
• XBASS 1 : Enhanced BASS level (low)
• XBASS 2 : Enhanced BASS level (Middle)
• XBASS 3 : Enhanced BASS level (High)
• XBASS 4 : Enhanced BASS level (Very high)
• XBASS 0 : No BASS enhanced/off
Press the XBASS repeatedly to select the bass sound.
" " appears on the display window.
Each time you press , the current mode appears on
XBASS
ME-
the display window and then the mode change as follows:
XBASS 0 XBASS 1 XBASS 2 XBASS 3 XBASS 4