Basics - Kenwood KDC-BT640U Instruction Manual

Basics

Faceplate
Volume knob
Detach button
* Only for illustration purpose.
Attach Detach
To
Turn on the power
Adjust the volume
Select a source
Change the display information
4
ENGLISH
Loading slot
Display window*
How to reset
On the faceplate
Press B SRC.
• Press and hold to turn off the power.
Turn the volume knob.
• Press B SRC repeatedly.
• Press B SRC, then turn the volume knob within 2 seconds.
Press DISP repeatedly. (Page 31)
Remote control (RC-406)
Lights up when
Bluetooth connection
is established.
(Page 14)
Reset the unit within
5 seconds after detaching
the faceplate.
Remote sensor (Do not expose to
bright sunlight.)
Pull out the insulation sheet
when using for the first time.
How to replace the battery
On the remote control
Press and hold SRC to turn off the power.
( Pressing SRC does not turn on the power. )
Press VOL or VOL .
• Press and hold VOL to continuously increase the
volume to 15.
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Press SRC repeatedly.
( Not available )