Change The Display Information; Troubleshooting - Kenwood KDC-BT640U Instruction Manual

References

Change the display information

Each time you press DISP, the display information changes.
• If the information is unavailable or not recorded, "NO TEXT", "NO INFO", or other information
(eg. station name) appears or display will be blank.
Clock time
Source name Display information: Main display
STANDBY Source name Date
RADIO Frequency Date
For FM Radio Data System stations only:
Station name/Program type
title/Radio text+ artist
CD or USB For CD-DA:
Disc title/Artist Track title/Artist
beginning
For MP3/WMA/AAC/WAV/FLAC files:
Song title/Artist Album title/Artist
time Date back to the beginning
iPod USB/iPod BT When [MODE OFF] is selected (page 9):
Song title/Artist Album title/Artist
beginning
SPOTIFY/ Context title Song title
SPOTIFY BT back to the beginning
BT AUDIO Song title/Artist Album title/Artist
beginning
AUX Source name Date
Main display
Level meter (Page 25)
back to the beginning
back to the beginning
Radio text Radio text+ Radio text+ song
Frequency Date back to the beginning
Playing time Date back to the
Folder name File name
Playing time Date
Artist Album title Playing time
Playing time Date
back to the beginning

Troubleshooting

Symptom
Sound cannot be heard.
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
"PROTECTING SEND SERVICE"
appears.
Source cannot be selected.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the
display is incorrect.
The unit does not work at all.
Correct characters are not
displayed.
• Radio reception is poor.
Playing
• Static noise while listening
to the radio.
back to the
Date
back to the
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. (Page 6)
Clean the connectors. (Page 29)
Reset the unit. (Page 4)
• This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Depending on the display language you have selected
(page 6), some characters may not be displayed
correctly.
Connect the antenna firmly.
ENGLISH
31