Cont. Shooting Settings - Sony ILCE-QX1 How To Use Manual

timer.
The self-timer function is active until it is canceled. Set the self-timer to [Off] after use.
[24] How to use

Cont. Shooting Settings

Sets how images are shot continuously.
1. Connect the camera and the smartphone via Wi-Fi, then tap
The setting screen is displayed.
2. [Cont. Shooting Settings]
Menu Items
Single Shooting (Default setting): Shoots a single image. Normal shooting mode.
Cont. Shooting (ILCE-QX1 only): Shoots images continuously while the shutter button of the
camera is pressed or the shutter button of the smartphone is slid to the left.
Cont. Shooting (finite) (DSC-QX30 only): Shoots continuously up to 10 images while the shutter
button of the camera is pressed or the shutter button of the smartphone is slid to the left.
Spd Priority Cont.(ILCE-QX1 only): Shoots images continuously at a faster rate while the shutter
button of the camera is pressed or the shutter button of the smartphone is slid to the left.
Note
Continuous shooting cannot be performed if no memory card is inserted in the camera.
The shooting speed of [Spd Priority Cont.] is estimated using our criteria. The speed of continuous
shooting may be slower, depending on shooting conditions (Image size or ISO setting).
In [Spd Priority Cont.], an image of each frame is immediately displayed between continuous shooting
frames.
When self-timer is set to [2sec] or [10sec], [Cont. Shooting Settings] is set to [Single Shooting]. When
[Cont. Shooting Settings] is set to a setting other than [Single Shooting], self-timer is set to [Off].
[25] How to use
Continuous Shooting Speed (DSC-QX30 only)
Sets the continuous shooting speed.
1. Connect the camera and the smartphone via Wi-Fi, then tap
The setting screen is displayed.
2. [Continuous Shooting Speed]
Shooting Shooting settings
desired mode
Shooting Shooting settings
desired mode
(Settings).
(Settings).