Scene Recognition - Sony ILCE-QX1 How To Use Manual

screen, depending on the shooting conditions. If this happens, move away from the subject or set the
zoom to T, and shoot with the flash again.
[21] How to use
Adjusting AF (auto focus) with one touch. Shooting an
AF adjusted still image with one touch (Touch Shutter)
If you tap the live view image displayed on the smartphone, the camera automatically focuses on the
tapped area, or automatically shoots a still image.
1. Connect the camera and the smartphone via Wi-Fi.
2. Tap the point you want to focus on.
If you tap another point before shooting, the camera refocuses on that point.
If you touch the One-touch AF release button (
When [Touch Shutter] is set to [On] on the menu, the camera automatically shoots a still image
after focusing is achieved.
Note
One-touch AF cannot be used in the following settings:
Movie mode
[Focus Mode] is set to [MF] (ILCE-QX1 only)
When a mount adaptor is used and the [Focus Mode] is set to [Phase detection AF] or [MF]
While using one-touch AF, only the shutter button is effective. If you would like to perform other
operations, cancel one-touch AF.
One-touch AF is released if either of the following operations is performed:
Shooting still images
Zooming
Hint
The AF frame display varies depending on the scene the camera recognized.
[22] How to use

Scene Recognition

Shooting Basic shooting method
Shooting Basic shooting method
), focus will be canceled.