Sony ILCE-QX1 How To Use Manual page 23

Registration is complete when the camera emits the connection completion beep.
An image is displayed on the Live-View Remote when the connection is established.
Note
Step 5 is required only when registering the first time.
[13] How to use
separately) via Wi-Fi
Connecting the Live-View Remote (sold separately) and
two or more cameras via Wi-Fi
You can connect a maximum of five cameras to the Live-View Remote and operate all cameras
simultaneously.
1. Turn on the power of the Live-View Remote and set its connection setting to [MULTI connection]
from the Network Settings, and set it to the registration standby mode in the MENU screen.
For details on operation, refer to the operating guide of the Live-View Remote.
2. Turn on the power of the camera.
3. Press the Wi-Fi button (A) of the camera and select
4. Press and hold the Wi-Fi button for 2 seconds or more.
Registration is complete when the camera emits the connection confirmation beep.
An image is displayed on the Live-View Remote when the connection is established.
Note
Step 4 is required only when registering the first time.
The camera should only be connected to a smartphone or a Live-View Remote via Wi-Fi and not
other Wi-Fi access points. If you choose to connect the camera to other Wi-Fi access points, then you
do so at your own risk as by doing so the camera may be subject to unauthorized access and any
content communicated may be at risk of interception.
Before Use Connecting the camera and the Live-View Remote (sold
(Multi Connection).