Sony ILCE-QX1 How To Use Manual page 25

To remove the smartphone, extend the clamps of the attachment as you did when attaching, and
remove. It is not recommended that you pull out the smartphone by sliding it to the side, since the
rubber part of the attachment clamps may be damaged.
Note
Make sure no buttons are caught when the smartphone is attached.
Make sure no fingers are caught when the smartphone is attached.
Do not swing the camera around with a smartphone attached to it, as the smartphone may slip out of
the attachment.
Support the camera body and the lens (ILCE-QX1), or support the camera (DSC-QX30) when
shooting. The attachment may fall off the smartphone if you hold the smartphone only, especially
when a heavy lens is attached to the ILCE-QX1.
[15] How to use
Removing the smartphone attachment (supplied)
Removes the smartphone attachment after using the camera.
1. Slide the removal lever to the lens side and rotate the attachment.
Before Use Attaching the camera to a smartphone