Table of Contents
Advertisement
Two wired remote controller
- All wired remote controllers are displayed on identical information.
- Last used wired romote controller has priority on product's movement.
- Set one wired remote controller as master,the others as slave.<Figure 1>
- The thermistor mode is operated by the wired remote controller set as "master"
Indoor
PCB
CAUTION
!
Two wired remote controllers should be same model name, otherwise it can cause unex-
pected problems.
For example) Using PQRCVSLOQW with PQRCVSLOQW is proper.
Using PDRCUDC0 with PDRCUDC0 is proper.
PQRCVSLOQW & PDRCUDC0 are improper.
Cable
Remote Controller
<Figure 1>
ACCESSORY GUIDE
Wired remote
controller
Wired remote
controller
Group Control
S/W GR
1
2
1. Master
2. Slave
53
Advertisement
Table of Contents
