Front Panel - Philips CCZ190AT99 Owner's Manual

CCZ190comb.QX33 4/5/99 9:51 PM

20 Front Panel

Cassette Compartment
Insert a video cassette tape here.
Wireless Remote Sensor
Receives a signal from your remote control
so you can operate the TV/VCR from a dis-
tance.
STOP/EJECT Button
Press once to stop the tape. When playback
is stopped, press to eject the tape. Press to
select an item in the pop up menu.
VIDEO Jack
Connect this jack to the video out jack of a
camcorder or a VCR. Details are on page 31.
AUDIO Jack
Connect this jack to the audio out jack of a
camcorder or a VCR. Details are on page 31.
EARPHONE Jack
Connect earphones (not supplied) here for
personal listening.
REW(ind) Button
When tape playback is stopped, press to
rewind the tape at high speed. During play-
back, press to rewind the tape while the pic-
ture stays on-screen. Press to change a set-
ting of a pop up menu item (for example, to
adjust the BRIGHTNESS setting).
PLAY Button
Press to play a tape. Details are on page 28.
Press to release Search or Still mode and
return to normal playback. Details are on page
46. Press to select an item in the pop up
menu.
F.FWD Button
When tape playback is stopped, press to fast
forward the tape at high speed. During play-
back, press to fast forward the tape while the
picture stays on-screen. Press to change a
setting of a pop up menu item (for example,
to adjust the BRIGHTNESS setting).
REC(ord)/OTR Button
Press once to start a recording. Details are on
page 29. Press repeatedly to start a One-
Touch Recording (an immediate timed
recording, 30 minutes to eight hours long) of
the channel you are watching. Details are on
page 30.
RECORD Light
Appears during a recording. It flashes when the
TV/VCR power is turned off to set a timer recording
or when a recording is paused. It flashes rapidly if the
TV/VCR power is turned off to set a timer recording
and a tape is not in the TV/VCR.
Page 20
AUDIO VIDEO
STOP/EJECT REW PLAY F.FWD REC/OTR CHANNEL VOLUME
EARPHONE
VOLUME o/p
Buttons
Press to adjust the
sound level.
Press the CHANNEL
o button and the
VOLUME p button
on the TV/VCR at
the same time to
display the pop up
menu. Press again to
remove the menu.
CHANNEL o/p
Buttons
Press to scan through
the TV/VCR channels.
During tape playback,
press to adjust the
tracking. Details are
on page 45.
Press the CHANNEL
o button and the
VOLUME p button
on the TV/VCR at
the same time to
display the pop up
menu. Press again to
remove the menu.
POWER Button
Press to turn the power on or off.
POWER