Setting The Frequency Step Width Due To The Jog Dial - JRC JSS-2150 Instruction Manual

5.3.8 Changing the frequency digit on screen (6, 7 digits / 7 digits)
The frequency digits on screen of the controller and the data terminal can be set according to the
following procedure.
■ ■
Procedure
1 1 . .
1 .
Press the
MENU
hierarchical menus, select 7.3 My
controller.
2 2 . .
2 .
Move the cursor to 8. Frequency digits
with the numeric keypad or jog dial, and
press ENT.
3 3 . .
3 .
Select the digit with the jog dial, and
press ENT.
7 only:
The frequency indication is always 7 digits.
(e.g. 12,345.67kHz)
6 & 7:
The frequency indication is normally 6 digits.
(e.g. 12,345.6kHz)
Frequency setting by the numeric keypad is 6 digits only.
In the following case, the frequency is indicated by 7 digits.
Setting of 7 digits of ITU channel number by the data terminal
・
(e.g. Telex CH No.615 6260.25kHz
・ Receiving of 7 digits of frequency int the DSC message.
5.3.9

Setting the frequency step width due to the jog dial

Possible to change the step width when changing the transmission and reception frequencies in
the jog dial.
■ ■
Procedure
1 1 . .
1 .
Press the
MENU
hierarchical menus, select 7.3 My
controller.
2 2 . .
2 .
Move the cursor to 9. Freq dial step with
the numeric keypad or jog dial.
3 3 . .
3 .
Select the step width setting with the jog
dial, and press ENT.
The selectable step is 0.01kHz*, 0.1kHz or 1kHz.
* The 0.01kHz can be set when the setting of
"7.3.8 Frequency digits" is "7 only".
key, and through
key, and through
7.3)My controller
1.LCD adjustment
2.Sound
3.User key assign
4.Tx meter
5.Data transfer
6.Menu shutdown
7.CH search ref
8.Frequency digits
7.3)My controller
3.User key assign
4.Tx meter
5.Data transfer
6.Menu shutdown
7.CH search ref
8.Frequency digits :7 only
9.Freq dial step
0.Back
See chapter 11 Appendix (4) )
7.3)My controller
2.Sound
3.User key assign
4.Tx meter
5.Data transfer
6.Menu shutdown
7.CH search ref
8.Frequency digits :7 only
9.Freq dial step
7.3)My controller
3.User key assign
4.Tx meter
5.Data transfer
6.Menu shutdown
7.CH search ref
8.Frequency digits :7 only
9.Freq dial step
0.Back
Settings & Registrations
:PWR
:10min
:40
:7 only
:PWR
:OFF
:40
:0.01kHz
:PWR
:10min
:40
:0.01kHz
:PWR
:OFF
:45
:0.01kHz
5-9