Gaggia BESANA User Manual page 18

ENGLISH
18 18
7 Before you slide the brewing unit back into the machine, make sure the two
reference signs on the side match. If they do not match, perform the following
step:
- Make sure the lever is in contact with the base of the brewing unit
8 Make sure the locking hook of the brewing unit is in the correct position.
-
To position the hook correctly, push it upwards until it is in uppermost
position.
Note: The hook is not correctly positioned if it is still in bottommost position.
9 Slide the brewing unit back into the machine along the guiding rails on the
sides until it clicks into position.
Warning: Do not press the PUSH button.
10 Close the maintenance door.
.