Table of Contents
Advertisement
• For some PHILIPS TV only:
After pressing TV, operates the TV's
menus.
21 OK/STATUS button
Before using this button, press VCR or
TV to select your target component.
• After pressing VCR:
– Goes to the next item on the VCR
menus.
– Displays the time counter, present
time, channel number, and
remaining tape length. ( P.14)
• After pressing TV:
For some PHILIPS TV only:
– Displays the TV's on-screen
information.
– Exits from TV's menu operations
when using the TV's menus.
For other manufacturers' TVs:
Functions as the ENTER button if
your TV requires pressing ENTER
after selecting a channel number.
To insert the batteries:
1
Remove the battery compartment lid
from the bottom of the remote
control.
Note:
This remote control and batteries are
supplied accessories.
Check to make sure they are included.
Also, check "Specifications" to see what
other accessories are included.
On-Screen Display
The following information (VCR operating status) appears on the TV screen. ( P.14)
Operation mode
SmartPicture setting
Remaining tape length
Tape speed
22 CH (channel)
Before using this button, press VCR or
TV.
• After pressing VCR, changes the
channels on the VCR. Release at a
desired channel.
• After pressing TV, changes the
channels on the TV. Release at a
desired channel.
23 TIMER button
Display the Timer Recording menu.
( P.15)
24 REC (ord) END SEARCH
button
Press prior to recording a program to
find the end of a previously recorded
program and the unrecorded portion of
a tape.( P.13)
2
Install two AA batteries —
R6(SUM-3)/AA — matching
polarity indicated inside the battery
compartment.
PLAY
AUTO
B-----+-----+-----+-----+-----+-----E
REMAIN 2:30
INDEX -1
LP
0:00:00
5
∞
/
button
15:00
Current time
CH12
Channel no.
Tape position indicator
Index no.
Time Counter
— 5 —
25 SKIP SEARCH buttons
Press during tape playback to fast
forward 30 seconds of a tape. ( P.13)
26 AUDIO/MUTE button
Before using this button, press VCR or
TV.
• After pressing TV, turns off the TV
sound.
27 REC (record)/OTR button
• Start recording when pressed once.
( P.12)
• Starts a recording for 30 minutes to 6
hours long. When pressed more than
once, the shut-off time increases in
30-minute intervals. ( P.14)
3
Replace the lid.
CAUTION
On Battery Replacement
Do not mix old and new batteries.
(Also never mix alkaline batteries
with manganese batteries.)
Note on the displayed information
• The time counter and remaining tape
length will not be correct when playing
back an NTSC tape.
• When you playback a thin tape like an
E-240 cassette tape or compact video
cassette tape (VHS-C), the remaining
tape length will flash.
Advertisement
Table of Contents
