Table of Contents
Advertisement
D
ESCRIPTION OF
Rear Panel
1
1 AC (alternating current)
power cord
Connect the AC power cord to an AC
outlet.
2 AUDIO IN (input) jacks
For connecting to the audio output jacks
on another VCR. ( P18)
Display Window
1
SP SLP
3 4
1 Operation mode/D. S. P. C
indicators
: Lights up from bottom to top while
D.S.P.C. is active. ( P.15)
‡ ‡ ‡ ‡ ‡
: Lights up during recording.
# # # # #
: Lights up during playback.
* * * * *
: Lights up during a pause.
2
(Timer) indicator
Lights up when the VCR is set for an
unattended recording (timer recording).
( P.16)
3 Speed indicator
Indicates the tape speed.
SP – Standard Play
LP – Long Play
SLP – Super Long Play.
(For NTSC signal only)
C
ONTROLS
AUDIO
VIDEO
3 AUDIO OUT (output) jacks
For connecting to the audio input jacks
on a TV or another VCR. ( P.7)
4 ANT. (antenna) IN (input)
terminal (from Antenna)
Connect your antenna or Cable box to
this terminal. ( P.7)
2
6
7
5
4 Programme time indicators
Show the program start time (
the program stop time (
Timer. ( P.16)
5
(Cassette-in) indicator
Lights up when there is a cassette in the
VCR.
6 Tape Remaining Time
indicator
Displays the time remaining on tape
after pressing OK/STATUS.
— 6 —
2
3 4
5 VIDEO IN (input) jack
For connecting to the video output jack
on another VCR. ( P.18)
ANT.IN
6 VIDEO OUT (output) jack
IN
OUT
For connecting to the video input jack
on a TV or another VCR. ( P.7)
RF OUT
7 RF OUT (output) terminal (to
TV)
5
6
7
Use the supplied RF coaxial cable to
connect this terminal to the UHF/VHF
input terminal on the TV. ( P.7)
7 Digital clock/Counter/
Channel indicator
• Normally the present time appears.
• When a tape is inserted, the time
• A channel number selected with the
4
) and
) for Turbo
4
• "CL" appears blinking when child
• Indicates START time, STOP time
• "U:01" appears when the video heads
(C
)
ONTINUED
counter appears (and is reset to
0:00:00).
If you always rewind your tapes
completely, you can use this counter
reading as an index to find where a
programme starts.
TV tuner built in the VCR appears.
When the external line input is
selected:
"L-F" appears for the front panel
jacks or "L-1" appears for the rear
panel jacks.
lock mode is engaged.( P.13)
and channel number during Turbo
Timer mode. ( P.16)
are dirty. ( P.20)
Advertisement
Table of Contents
