Table of Contents
Advertisement
DSPC
The DSPC (Digital Studio Picture
Control) system checks the condition
of the tape in use during recording and
playback, and compensates to provide
the highest possible recording and
playback pictures. The default setting
is "ON".
1
Select VCR Set Up Mode
1 Press VCR.
DSPC
2 Press MENU.
5
ON SCREEN MODE
TIMER REC SPEED
3 Press PLAY
or
∞
STOP
to select
SELECT:
"VCR SET UP"
END: MENU
then press OK/STATUS.
The VCR Set up menu appears.
2
Set DSPC Mode
5
∞
Press PLAY
or STOP
3
DSPC", then press FF
to set DSPC
to "ON" or "OFF".
3
Finish Setting
Press MENU.
Once the "DSPC" mode is set to "ON",
the DSPC system works for both
recording & playback, as described
below;
For Recording
¶
Press REC/OTR
.
DURING DSPC
DSPC COMPLETED
• The VCR spends approximately 7 seconds
assessing the condition of the tape, then
begins recording.
Notes:
• The DSPC system works for SP, LP or SLP
modes only after a tape has been inserted
and the Record mode is first initiated.
Also, it works if the colour mode is changed.
It does not work during recording.
• In the case of timer recording, the DSPC
system works before recording is initiated.
• Once the cassette is ejected, the DSPC data
is cancelled. The next time the cassette is
used for recording, DSPC is re-performed.
• When "DSPC" is displayed, the VCR does
not start One Touch Recording ( P. 14).
• Since the DSPC system works before
recording actually starts, there is a delay
of approximately 7 seconds after REC/
¶
OTR
is pressed. To make sure you
record the desired scene or programme in
its entirety, first perform the following
steps:
1) Press and hold STILL/SLOW (or
STILL/PAUSE
ON
ON
and press REC/OTR
MANUAL
RECORD PAUSE mode.
• The VCR then automatically checks the
CHANGE:
condition of the tape and, after
approximately 7 seconds, re-enters
RECORD PAUSE.
2) Press REC/OTR
recording.
• If you want to by pass the DSPC
to select "
system and begin recording immedi-
ately, set "DSPC" to "OFF".
For Playback
Press PLAY
• The VCR adjusts the playback picture qual-
ity based on the quality of the tape in use.
• DSPC is active during Auto Tracking.
"DSPC" appears blinking on the front
panel's display window.
Notes:
• When watching a tape recorded with
"DSPC" set to "ON", it is recommended
that you leave DSPC to "ON" during
playback as well.
• "DSPC" only appears at the beginning of
automatic tracking. Even though it doesn't
appear after that, the DSPC function is
operative.
8
on the front panel)
¶
to engage the
¶
again to start
3
.
— 15 —
Timer Recording
To record while you're away, follow step
1 — 9 below. For each programme you
set, the VCR will turn on, start recording,
and turn off automatically. You can store
up to 8 programmes.
Make sure....
• The clock is set to the correct time
before setting timer recording.
• A cassette is inserted in the VCR and
the record tab of the cassette must
not be removed.
• The remote control operation mode
is set correctly for operating your
target component.
– Press VCR to operate the VCR.
– Press TV to operate the TV.
FOR EACH STEP BELOW, YOU
NEED TO FINISH WITHIN 60
SECONDS; OTHERWISE,
PROGRAMMING WILL HAVE TO
BE RESTARTED FROM STEP 1.
1
Select Timer Mode
1 Press VCR.
2 Press TIMER.
QUICK PROGRAMMING
PROGRAM REVIEW
The Timer
Recording menu
SELECT:
appears.
END: TIMER
2
Select Programme mode
5
1 Press PLAY
or
∞
ONE TIME PROGRAM
PROGRAM
STOP
to select
CHANNEL+/–
START +/–
"QUICK PROG-
STOP +/–
REC SPEED SP
RAMMING" then
DATE +/–
press OK/STAT-
DAILY: 8
CONFIRM: OK
US.
The Quick Programming menu
appears.
• If you have already made 8
programmes, "ALL PROGRAMS IN
USE" appears and goes back to the
Timer Recording menu. If this
happens, delete unwanted programmes.
( P.20)
3
Select Channel
5
∞
Press CH
or
to
ONE TIME PROGRAM
PROGRAM
enter the TV channel.
CHANNEL+/– 12
5
START +/–
• Holding down CH
STOP +/–
∞
REC SPEED SP
or
rapidly scans
DATE +/–
through the channels.
DAILY: 8
CONFIRM: OK
• To record from exter-
5
nal line input, press CH
or
"A/V REAR" or "A/V FRONT" appears.
CONFIRM: OK
1
– –
– –:– –
– –:– –
– –/– –/– –
WEEKLY: 9
END: TIMER
1
– –:– –
– –:– –
– –/– –/– –
WEEKLY: 9
END: TIMER
∞
until
Advertisement
Table of Contents
