Additional Functions; Setting The On-Screen Display (Osd); Continuous Playback; Automatic Switch-Off (Tuner Mode) - Philips VR200/02 User Manual

7.

ADDITIONAL FUNCTIONS

Setting the on-screen display (OSD)

You can switch the on-screen display of the current operating
information on or off.
a
Switch on the TV set and select the programme number
for the video recorder.
b
Press the button on the remote control. The main
MENU
menu will appear.
CLOCK
OSD
CHANNEL ALLOCATION
CHANNEL/FREQUENCY
MANUAL SEARCH
AUTOSEARCH
LANGUAGE
COUNTER
------------------------
-/+
c
Select the line 'OSD' with the
confirm with the button.
OK
d
Select one of the options shown with the
'ON': Shows the OSD for a few seconds only.
'OFF': Switches off the OSD.
e
Confirm with the button.
OK

Continuous playback

You can automatically play a cassette again and again. When
the video recorder reaches the end of the tape or the end of
the recording, it will rewind and start again.
a
Put a cassette in the machine.
b
Press the button.
PLAY G
c
Press the button on the remote control and the
MONITOR
PLAY G button on the video recorder at the same time .
On the video recorder display you will see:
d
If you want to cancel continuous playback, repeat step
c
.
D During continuous playback, no other button will
work. After a power failure, playback will
automatically start again.
OK
P r or P q buttons and
button.
P q
REP

Automatic switch-off (tuner mode)

If you do not use the video recorder for a few minutes in
certain modes (e.g.: STOP), it will switch to standby
automatically. You can cancel this function to use the video
recorder as a television receiver (tuner).
a
Hold the STOP h button until appears on the video
recorder display.
b
Select the programme number you want with the
P q button or with the number buttons
c
Switch off the video recorder with the
button, if you no longer want to watch TV.
or
P r
.
0-9
TV/STANDBY m
19