Pioneer TVM-PW910T Instruction Manual page 29

Installing the monitor (continued)
Remove the cover on the left of the fixture
3
4 Connect the power and AV interface cable
Connect the power and AV interface cable connection of the accessories to its
connector terminal. The cable is wired along the cable guide.
5
Install the fixture to the shaft-boot of the headrest
Insert the C-bracket at
the rear of the fixture
onto the lower side of the
boot properly.
Cover
ー
Slide from the right to the
left while pressing from the top.
C-bracket
Shaft lock button
Guide
Connector
If the shaft lock
button is on the right,
remove the right
cover as well.
Cover
29