Switching To Wide Mode - Pioneer TVM-PW910T Instruction Manual

Switching to wide mode

By selecting the mode that matches the input image, the user can enlarge the image to full screen.
Press W/MENU button
When pressed, the switching will be in the following manner:
※ When switching, the current mode will be shown on the upper left corner of the screen (for about three seconds)
AUTO
FULL
JUST
CINEMA
ZOOM
NORMAL
FIT*
* Display and selection can only be done when the image input is in [HDMI]
12
［AUTO］→［FULL］→［JUST］→［CINEMA］→
［ZOOM］→［NORMAL］ （→［FIT*］ ）→ Return to
Will switch automatically to the most optimum wide mode by adjusting to
the input image signal
Will enlarge the image to the right and left and will display the picture on full
screen. If the aspect (width/height) ratio of the input image is 4:3, a picture with
landscape (horizontally longer) orientation will be shown.
Will enlarge the image to the right and left and will display the picture on full
screen. The ratio at the centre of the image will become smaller, while the right
and left sides will become larger.
Will enlarge the image to the top and bottom and will display the picture on full
screen. The top/bottom of the image will be cut.
Will enlarge the image to the top and bottom as well as right and left uniformly.
The edges (a part of the top/bottom and right/left) of the image will be cut.
A black belt will be displayed on the right and left of the image. If the aspect
(width/ height) ratio of the input image is 16:9, a picture with portrait (vertically
longer) orientation will be shown.
When HDMI input is selected, the image will be shown at the optimum size.
Reference
• If the wide mode settings description is stated individually for video,
HDMI input systems, press SRC/Power button to select the setting, then
select the mode with W/MENU button.
Precaution
［AUTO］