How To Change A Programmed Recording (Timer); How To Check, Or Delete A Pro- Grammed Recording (Timer); Problems And Solutions For Pro- Grammed Recordings - Philips VR550/58 User Manual

3.
3. Press
TURBO TIMER
'Pro' will briefly appear in
the video recorder display.
After 2 seconds, default
program number will
appear in the display. Set
the desired program num-
ber using
PLAY B-K
.
STOP C-L
4.
4.
Press
TURBO TIMER
The program number you have just set will be
displayed.
Error message: 'Err'
• If this error message appears after pressing
, the start time or end time is
TURBO TIMER
same as another recording.
5.
5.
Insert a cassette with an intact security tab
(unprotected).
6.
6. Switch off with
.
STANDBY/ON y y
The programmed recording will only function
when the video recorder is switched off with
.
STANDBY/ON y y
How to check, or delete a pro-
grammed recording (TIMER)
1.
1.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.
Press . The main menu will appear.
MENU
3.
3. Select 'TIMER' with
Then press
FWD 1- B
4.
4.
Select 'TIMER LIST' with
and confirm with
FWD 1- B
SELECT K L CHOOSE B
ONCE
DAILY
WEEKLY
TIMER LIST
END=EXIT
5.
5. Select timer block with
Timer block disappeared when I pressed
.
FWD 1- B
You have checked all the programmed record-
ings. If you want to check them again, repeat
steps 2 to 5.
6.
6.
To cancel the recording, press
7.
7.
To end, press
STATUS/EXIT
8.
8.
Switch off with
STANDBY/ON y y
.
PWR.
PWR.
PWR.
.
or
PLAY B-K STOP C-L
.
or
PLAY B-K STOP C-L
.
.
FWD
1- B
.
CLEAR
.
.
How to change a programmed
recording (TIMER)
1.
1. Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.
Press
MENU
3.
3.
Select 'TIMER' with
Then press
4.
4. Select ONCE, DAILY or WEEKLY recording
with
PLAY B-K
FWD
1- B
5.
5.
Select a TIMER block with
number indicates an empty TIMER block.)
ONCE
SELECT TIMER NUMBER
END=EXIT
6.
6. Press
CLEAR
correct information with
7.
7.
To end, press
8.
8.
Switch off with
Problems and solutions for pro-
grammed recordings
Error message: ' ' flashes in the video
recorder display
• No cassette was inserted. Insert a cassette and
.
switch off the video recorder using
Cassette was ejected as soon as the
,
STANDBY/ON y y
• A cassette without the security tab was inserted.
Undo the erase protection (chapter 'Manual
recording', section 'Preventing accidental eras-
ing') or insert a different cassette.
'TURN OFF VCR FOR TIMER RECORDING'
flashes on the TV screen
• The video recorder is switched on several min-
utes before the start of a programmed recording.
Switch off the video recorder with
STANDBY/ON y y
will only function when the video recorder is
switched off.
Cassette is ejected during recording
• The end of the tape was reached during recording.
The video recorder does not react
• While a programmed recording is being made,
you cannot operate your video recorder manu-
ally. If you want to cancel the programmed
recording, press
12
. The main menu will appear.
or
PLAY B-K
.
FWD 1- B
or . Then press
STOP C-L
.
0..9
TIMER - 1 2 3 4 5 6 7 8 -
to delete information and input
.
0..9
.
STATUS/EXIT
STANDBY/ON y y
.
button was pressed
. A programmed recording (timer)
on the front panel.
STOP/EJECT
.
STOP C-L
. (The flashing
.
STANDBY/ON y y
EN