How To Check, Change Or Delete A Programmed Recording (Timer) - Philips VR 270B/07 User Manual

01
01
20:00
22:00
Programming a recording (TIMER)
How to check, change or delete a
programmed recording (TIMER)
1
Press TIMER k on the remote control.
2
Select the programmed recording (TIMER) you want to check, change
or delete with P =r or P ;q .
Delete programmed recording
CLEAR (CL)
Press
'--' appears rather than the displayed values
MENU
To end, press
3
Press TIMER k . The video recorder display will read, for instance,
'DATE 01' for the date of the recording.
If required, change the displayed information in this step and the
following steps using P ;q , P =r or the number buttons 0-9 .
4
Press TIMER k . The video recorder display will read, for instance,
'PROG. 01' for the programme number of the TV channel.
5
Press TIMER k .
The start time will appear in the video recorder display, e.g.
'START 20:00'.
6
Press TIMER k .
The end time will appear in the video recorder display, e.g.
'END 22:00'.
7
Press TIMER k . 'OK' will briefly flash in the video recorder display.
8
Switch off with STANDBY/ON m .
.
.
29